How do I measure the torque of a flange - mount servo motor?

Nov 20, 2026

Leave a message

As a supplier of flange - mount servo motors, I often encounter questions from customers about how to measure the torque of these motors. Torque is a crucial parameter in understanding the performance and capabilities of a servo motor, especially in applications where precise motion control is required. In this blog, I will share some common methods for measuring the torque of a flange - mount servo motor.

Understanding Torque

Before delving into the measurement methods, it's essential to understand what torque is. Torque is a measure of the force that can cause an object to rotate about an axis. In the context of a servo motor, torque determines the motor's ability to drive a load. There are different types of torque, such as static torque, which is the torque required to hold a load in place without movement, and dynamic torque, which is the torque needed to accelerate or decelerate a load.

Direct Measurement Methods

Using a Torque Sensor

One of the most accurate ways to measure the torque of a flange - mount servo motor is by using a torque sensor. A torque sensor is a device that can measure the rotational force applied to a shaft. When using a torque sensor, the motor shaft is connected to the sensor, and as the motor rotates, the sensor measures the torque.

There are two main types of torque sensors: strain - gauge - based and magneto - elastic - based. Strain - gauge - based sensors work by measuring the deformation of a shaft under load. When a torque is applied to the shaft, the strain gauges attached to the shaft change their resistance, which can be measured and converted into a torque value. Magneto - elastic - based sensors, on the other hand, measure the changes in the magnetic properties of the shaft due to the applied torque.

The advantage of using a torque sensor is its high accuracy. However, it can be relatively expensive, and installation can be a bit complex, especially for small motors.

Dynamometer

A dynamometer is another device that can be used to measure the torque of a servo motor. A dynamometer works by applying a load to the motor and measuring the power input and output. By knowing the power and the rotational speed of the motor, the torque can be calculated using the formula:

[T=\frac{P}{\omega}]

where (T) is the torque, (P) is the power, and (\omega) is the angular velocity.

There are different types of dynamometers, such as eddy - current dynamometers, hydraulic dynamometers, and electric dynamometers. Eddy - current dynamometers work by creating eddy currents in a metal disc, which creates a braking force on the motor. Hydraulic dynamometers use hydraulic fluid to create a load on the motor, while electric dynamometers use an electric generator to absorb the power from the motor.

Dynamometers are useful for measuring the torque of a motor under different operating conditions, such as varying speeds and loads. However, they are also relatively large and expensive, and require a significant amount of space for installation.

Indirect Measurement Methods

Current Measurement

In some cases, the torque of a servo motor can be estimated by measuring the current flowing through the motor. In a DC servo motor, the torque is proportional to the current. The relationship between torque and current is given by the formula:

[T = K_t\times I]

where (T) is the torque, (K_t) is the torque constant of the motor, and (I) is the current.

The torque constant (K_t) is a characteristic of the motor and is usually provided by the manufacturer. By measuring the current using a current sensor, such as a Hall - effect sensor, and knowing the torque constant, the torque can be estimated.

Low-Voltage DC Servo MotorsLow-Voltage DC Servo Motors suppliers

The advantage of this method is its simplicity and low cost. However, it is not as accurate as direct measurement methods, as the relationship between torque and current can be affected by factors such as motor temperature and magnetic saturation.

Back - EMF Measurement

Another indirect method for measuring the torque of a servo motor is by measuring the back - electromotive force (back - EMF). Back - EMF is the voltage generated by the motor as it rotates. The back - EMF is proportional to the rotational speed of the motor.

When a load is applied to the motor, the motor slows down, and the back - EMF decreases. By measuring the back - EMF and knowing the motor's characteristics, the torque can be estimated.

This method is also relatively simple and can be used in some applications where direct measurement is not possible. However, it requires a good understanding of the motor's electrical characteristics and can be affected by factors such as motor winding resistance and external electrical noise.

Considerations for Torque Measurement

When measuring the torque of a flange - mount servo motor, there are several factors that need to be considered:

  • Accuracy Requirements: The accuracy required for the torque measurement depends on the application. For some applications, such as precision robotics, high accuracy is essential, while for other applications, a rough estimate of the torque may be sufficient.
  • Operating Conditions: The torque of a motor can vary depending on the operating conditions, such as temperature, speed, and load. It is important to measure the torque under the actual operating conditions to get an accurate result.
  • Measurement Equipment: The choice of measurement equipment depends on the accuracy requirements, the size of the motor, and the budget. As a supplier, we can provide guidance on the most suitable measurement equipment for different applications.

Our Product Range

We offer a wide range of flange - mount servo motors, including 24v Dc Servo Motor, 12v Servo Motor High Torque, and Low - Voltage DC Servo Motors. These motors are designed to provide high performance and reliability in various applications.

If you are interested in learning more about our flange - mount servo motors or need assistance with torque measurement, please feel free to contact us for a detailed discussion and potential procurement. Our team of experts is ready to provide you with the best solutions for your specific needs.

References

  • Electric Machinery Fundamentals by Stephen J. Chapman
  • Servo Motors and Industrial Control Theory by J. M. Merritt

Send Inquiry